Carbon Fiber Skinning a 3D printed sim racing wheel! скачать в хорошем качестве

Carbon Fiber Skinning a 3D printed sim racing wheel!

In episode #5, it's time to skin the wheel in carbon fiber and epoxy resin! Contrary to what you might think, it's really a simple and inexpensive process but be fiddly and can take some time so you can't rush it. First I reassemble and join the two printed wheel parts with epoxy glue, then we'll mix up the resin and do a single coat and wait until it's tacky to the touch. The carbon fiber sheet then gets laid on top followed by several coats of resin with a few hours of drying time in between each coat. Finally, the parts are sanded and coated again. Index: 0:00 joining the two parts of the back 4:00 joining the front panels 7:20 Starting with the skinning 9:37 Applying the adhesive layer 10:50 Layer applied 12:25 Applying a coat of resin 14:00 Dried and roughed up coat 15:36 coat of resin 16:22 moving to the front panel 17:33 in the vac bag 18:10 unbagging 21:37 out of the bag again 23:36 trimmed and sanded with a dremmel 26:36 resin coating 28:00 coating the knobs DIY Composites: Peel Ply, Resin, Pigment etc https://www.ebay.com.au/str/diycompos... Easy Composites:    / easycompositestv