Building a Factory 5 Racing Roadster: Footbox and Sway Bars! скачать в хорошем качестве

Building a Factory 5 Racing Roadster: Footbox and Sway Bars!

In this episode of The Roadster Experience, we tackle the assembly of the Footbox and the installation of the Sway Bars on the Factory Five Roadster! I’ll walk you through the entire process, including essential setup steps like FINDING the INSTRUCTIONS for the sway bars, and getting the bars installed on the front and rear of the car. We'll then mock up the footbox aluminum then go through the process of silicone and riveting it all in place. The directions for the Front and Rear Sway Bars can be found here: Front: www.factoryfive.com/wp-content/uploads/2017/08/SWAYBAR-front.pdf Rear: www.factoryfive.com/wp-content/uploads/2017/08/SWAYBAR-2015-IRS.pdf 🔧 Key Steps Covered: Positioning the Front and Rear Sway Bars. Switching out the mounting hardware on the front shocks. Installing the mounting tabs in the rear of the car. Attaching the Sway Bars in place Installing the Footbox in the car. Fitting, trimming and finally riveting the panels in place. Tips and lessons learned along the way. Throughout the video, I highlight lessons learned, including challenges with threads, cleaning up previously drilled holes. If you’re enjoying the series, be sure to like, subscribe, and hit the notification bell for more updates as we continue this build journey. Next up, we’ll dive into the driver's side footboxes and installing the fuel tank! #FactoryFiveRoadster #RoadsterExperience #DIYCarBuild #footbox #swaybars