The vacuum suction of the emulsifier is transferred from the oil and water pot to the main pot скачать в хорошем качестве

The vacuum suction of the emulsifier is transferred from the oil and water pot to the main pot

The vacuum suction of the emulsifier is transferred from the oil and water pot to the main pot To perform vacuum suction, follow these steps: 1. Ensure that the vacuum suction device is turned off and power off from the power supply. 2. Check and prepare the required vacuum suction equipment and accessories. 3. Connect the suction pipe or suction tip to the appropriate port on the vacuum suction device. 4. Place the suction tube or suction head in the position where the suction is required to ensure full contact with the material. 5. Open the vacuum suction device and set the required vacuum strength or suction time according to the device's instructions. 6. Wait for a period of time for the vacuum suction device to absorb the material. This may take some time, depending on the nature and quantity of the material. 7. Close the vacuum suction device and remove the suction tube or tip from the material. 8. Dispose of the absorbed material as needed, such as pouring into containers or further processing. 9. Clean and maintain vacuum suction equipment to ensure its normal operation and hygiene. Note that different vacuum suction devices may have specific operation methods and safety precautions. Please refer to the user manual of the device you are using or contact the manufacturer for detailed operation instructions. sales manager :Camille Chen WhatsApp：+8618898530935 Email: [email protected] wechat:+8618898530935 website：www.yuxiangmachinery.com