Frequency BFO Correction after V.2 HW modification скачать в хорошем качестве

Frequency BFO Correction after V.2 HW modification

After installing the SI4732 Chip V2 FPC module I see that on all modded radios the BFO setting needs to be manually adjusted to get the receiver frequency exactly on frequency, because SSB signals sounds like a Micky Mouse. It's boring always manually adjusting BFO, because after every reboot this new BFO setting is erased. Therefore, I did this repair directly on the FPC Board. The reason why I use a frequency of 14.200 on the generator and 14.199 on the receiver is that in USB modulation this tuning produces exactly a 1kHz tone in the speaker, which I can easily measure using the Spectroid mobile application. If I measure a value other than 1kHz, it means that the receiver is detuned from the actual frequency. In this case, it was over 300Hz, which is quite a lot. Capacitors set showed in the video (I've choosed: 0805 92ValueX50PCS): https://s.click.aliexpress.com/e/_c3S... Capacitors Meter Hantek1832C: https://www.aliexpress.com/item/10050... 0.5M-470M Radio Frequency Signal Source Generator: https://s.click.aliexpress.com/e/_c4V... #quansheng #uvk5 #modification