Musikraft Strat Neck #5 - With a Few Changes скачать в хорошем качестве

Musikraft Strat Neck #5 - With a Few Changes

These are all the specs you will need to order a neck exactly like this one. Musikraft does such high quality work. The changes from the previous four necks are: 7105 (SS) "medium" frets (same dimensions of 6105's but Musikraft fret dimensions are slightly better IMO, .095" W x .047" H., the thin lacquer finish vs. the Fender oil finish, Fender Custom Shop 10/56 V .88" .99" neck profile (very popular), and white dot fret markers. ALSO, I stuck with the 7-1/4" to 9-1/2" compound radius because I've had great results with the others with no fret outs or other issues. I almost went with straight 7-1/4" but I didn't want to mess with success. The hardest part about ordering a Musikraft neck is making all of the decision on what options to choose. I hope this helps. I delayed ordering a neck for years because I wasn't sure if I was making the correct choices. You could order this neck and be very happy. They are not as inexpensive as a basic neck when you add the vintage veneer, roasted maple, etc. CBS® Neck Custom Build Guitar Neck Build: Qty: 1, Price: $215.00 Construction Type: 2 Piece Constructed Orientation: Reverse for Right Handed Players Scale Length: 25.5" Standard Fender Number of Frets: 21 Nut Width: 1.650" (41.9mm) Nut Slot Style: 1/8" Nut Slot (Standard Fender) Heel Width and Type: 2-3/16" (55.55mm) Rounded Strat Truss Rod Type: Single Acting w/ Vintage Nut adjust @ Heel 59 Truss Option: Standard Positioning Shaft Wood: Roasted Rock Maple ($80.00) Fingerboard Wood: Roasted Rock Maple ($10.00) Fingerboard Style: Veneer (Vintage Fender) 21 Fret Only ($40.00) Fingerboard Radius: Compound 7-1/4" to 9-1/2" ($40.00) Fingerboard Edge Style: Semi Rolled Fingerboard Edges Tuner Hole Size: 11/32" (Vintage Kluson) Top Inlay Type: 1/4" Dots (White) Side Markers: White 2mm Side Dot Location: 50/50 Split (Veneer Style Finger Board Only) 12th Dot Spacing: Wide (Vintage Style Pre 1964) Fret Size and Type: 7105 Stainless (Medium) ($60.00) Skunk Stripe Option 2pc: None Back Profile Shape and Size: Fender Custom Shop- 10/56 V .88 .99 Binding: None Tuner Install: Supply and Install Kluson Tuners ($69.00) Headstock Veneer: NONE Nut Installation: Install Slotted Bone Nut ($75.00) Nut String Spacing: Not Applicable Finish: Thin Lacquer Sealer (Very Thin Coating) ($20.00) Fingerboard Finish: 2 pc Maple - Finish entire neck as selected in "FINISH" Category Neck Mounting Holes: Drill Neck Mounting Holes Carbon Fiber Reinforcing Rods: None Administrative Up-Charges: None Order Change Acknowledgement: I have read the order change policy Delivery Confirmation: No Signature required upon delivery Comments: Please use new extended CBS headstock as per Scott Smith. Thank you. Be sure to install left handed Kluson tuners (just making sure). Please use the stock nut string spacing you used on my past neck orders #31496, 34413, 34768, and 38355 Total: $609.00 1 $609.00 Subtotal: $609.00 Shipping: $26.00 via UPS Ground Tax: $0.00