Eliminate the Stink of 3D Printing the Easy Way with Carbon Air Filtration Pt.1 - Resin & FDM Filter скачать в хорошем качестве

Eliminate the Stink of 3D Printing the Easy Way with Carbon Air Filtration Pt.1 - Resin & FDM Filter

Carbon Air Filtration for 3D Printing Pt.1 - DIY Activated Charcoal Filter for Resin, FDM Printer Check out PART 2 of this Carbon Filter how-to video series for the final improvements and making it look better too.    • Eliminate the Stink of 3D Printing the Eas...   Parts List Phresh Carbon Filter 701003 Inline Filter, 4 in x 12 in | 200 CFM - https://amzn.to/2ur441P TerraBloom 4" Inline Duct Fan with Fully Adjustable Speed Control - https://amzn.to/2WcJtua 4in Inlet Flange to connect the duct hose to the bucket - https://amzn.to/2RDa4QR 4" Duct Hose - https://www.thingiverse.com/thing:287... 5 Gallon Bucket (2 needed) - https://amzn.to/2OlpNBE 5 Gallon Bucket Lid (1 needed) - https://amzn.to/3kp7jPq 4in Flex Cuff with Hose Clamps - This is used to connect between the filter outlet and the fan inlet - https://amzn.to/33IVvku [ALTERNATIVE to buying the 4in flex cuff with hose clamps] 3D printed carbon filter to fan coupler (ninjaflex or other flexible filament is preferred): https://www.thingiverse.com/thing:456... 3D printed Anycubic Photon Vent to 4" Duct Adapter (This same part can be used for the duct to bucket lid connection) - https://www.thingiverse.com/thing:287... 3D printed bucket clips: https://www.thingiverse.com/thing:456... I made an activated carbon filtration system that removes all the stink from my Photon. I used a 5-gallon bucket trick to draw the airflow through the filter from outside in, the way these filters are designed to work, vs all the carbon filter builds I've seen push the airflow through the filter from inside out, which makes it more difficult/impossible to use the pre-filter. The filter is a good quality carbon filter made by Phresh for use in grow rooms ( https://amzn.to/2ur441P ). It is more expensive than the cheap filters, but you get what you pay for in air quality and longevity. In addition, I found a fan with variable speed control that only draws as much air as is needed to remove the smell thereby increasing filter lifespan and results in silent operation. The TerraBloom 4" Inline Duct Fan ( https://amzn.to/2WcJtua ) is really well made and has excellent speed control. For the 4in inlet coupler, I used a metal one that I already had, but you can buy a plastic version here that will work equally well: https://amzn.to/2RDa4QR For the filter to fan coupler, I initially made it using a yogurt cup with hose clamps (as seen in video Part 1), and then I 3D printed a coupler from Ninjaflex (as seen in video Part 2), but you can also buy a 4in rubber coupler with hose clamps: https://amzn.to/33IVvku The Anycubic Photon Vent to 4" Duct Adapter is easy to print on FDM printer, but alternatively, you could use another one of these plastic inlet couplers ( https://amzn.to/2RDa4QR ) and attach it to the printer enclosure. Created by http://www.engineerable.com for making parts for knife making at http:www.krvrknives.com The products shown here were purchased by me with the intent to use. I did not receive any free items, and I am not being paid or compensated for this review. The video and description may contain affiliate links. If you click on a link, I may receive a commission. Money earned helps to support my channel and bring you more informative videos about engineering, 3D printing, and DIY.