Useful coding of the Audi A6 C7 A7 hidden activation functions VAG-COM скачать в хорошем качестве

Useful coding of the Audi A6 C7 A7 hidden activation functions VAG-COM

— Gauge test needle sweep [17 — Instruments] Coding — Byte 1, bit 0 by 1 — Replacing the dashboard logo [17 — Instruments] Coding Byte 9, bit 00 — A6, 01 — A7, 02 — S6, 03 — S7, 04 — RS6, 05 — RS7 — Disable seat belt warning [17 — Instruments] Coding — Byte 0, bit 2-4 00 Seat Belt inactive. — Turning off the headlight washer [09 — Cent.select.] Coding — Byte 18, bit 0 — uncheck the box — Coming Home and Leaving Home without low beam (dimensions only) [09 — Cent.Select.] Coding — Byte 6, bit 4 — uncheck the box — Turn lighting (enabled by default on adaptive headlights) [09 — Cent.Select.] Coding — Byte 4, bit 0 — check the box. — Disabling DRL attenuation when turning on the turn signal [09 — Cent.Elect.] Coding — Byte 3, bit 7 — uncheck the box — Disabling the rear dimensions when the DRL is enabled [09 — Cent.Elect.] Coding — Byte 2, bit 7 — uncheck the box — Switching off the DRL in the "0" position of the light switch when lifting handbrake [09 — Cent.select.] Coding — (Long Coding 2) — Byte 3, Bit 1 — set check the box, or just add +2 to the number in 3 Bytes — DRL control in the MMI menu [09 — Cent.select.] Coding — Byte 2, bit 0 — check the box — Control contour lighting in the MMI menu (on the extended lighting package, it is enabled by default) [09 — Cent.Select.] Coding — Byte 4, bit 6 — check the box — Time to switch the seat heating stages [08 — Auto HVAC] Adaptation Channel 50 is the Transition from level 3 to 2. (default 10 minutes) Channel 51 — Transition from level 2 to level 1. (default 0 minutes) — Changing the steering wheel heating temperature [16 — Steering wheel] Adaptation — Channel 10 Changing the native value (28) to the one we need. For example, 32. — The removal of the Parking brake without the control of the seat belt [53 — Parking Brake] Security Access. code 78713 Adaptation — "Seat bell buckle detection" Set to not activ — Engineering menu (Green Menu) [5F — Information select.] Adaptation — channel 05, 1 — enabled, 0 — disabled — MMI shutdown time without ignition [5F — Information select.] Adaptation — Channel 03 Specify the time (by default, 10min. Maximum 999min.) — Emergency braking indication [46 — Central Conv.] Coding — Byte 8: Bit 0 – enabling the alarm Bit 1 – strobe stop light — Disabling the Safe Lock function (locking the internal handles when closing the car from the outside) [46 — Central Conv.] Coding — Byte 3: Bit 3 and bit 4 – Check The box — Inversion of the [09 — Cent.select.] Security Access button, code 20113 Adaptation — Channel 34 To take away from the value 4 Start/Stop is disabled by default Add to value 32 - Start-stop remembers the last state before stopping the engine Add to the value 64 - Invert the light bulb (it will light when start/stop is enabled) — Completely disable Start/Stop [01 — Engine] Coding of Byte 5, Bit 6 remove the check mark. [09 — Cent.Elect.] Coding of Byte 20, Bit 2 remove the check. — So that the engine does not stall when opening the door (who should start/stop) [46 — Central Conv.] Byte Coding 15 For gasoline bits 0,1,2,3 set 0 For diesel bits 4,5,6,7 set 0 — Adding modes to Drive Select mode (Efficiency, Allroad) [09 — Cent.select.] Security Access, code 20113 Adaptation — channel 66 (for adding modes) Adaptation — Channel 70 (to be added to Individual) Add 32 and/or 16 to the standard number 14. Each mode has its own number: 2 — comfort, 4 — auto, 8 — dynamic, 16 — offroad, 32 — efficiency 2+4+8+32=46 (comfort+auto+dynamic+efficiency) — Turning off the wipers ' pre-cleaning swish [09 — Cent.Elect.] Coding — select 8K0955559 instead of the BCM1 block (4G1955119) Byte 1 Bit 3 — uncheck the box — Disable checking for LEDs [46 — Central Conv.] Security Access 16017 Adaptation — 181 channels — from minus 3072 - reverse lamps from a value of minus 768 - rear PTF from minus 12288 - rear turn signals Adaptation — 192 channel — from minu 1 number illumination — Reset the service interval [17 — Instruments] Evolution FIX: Distance covered since last millage-dependent inspection — 0 FIX: Time since last time-dependent inspection — 0 ESI: Resetting ESI — Reset — Replacement of rear pads [53 — Parking Brake] Basic settings — Start lining change mode — Start Turn off the ignition. Changing the pads. Replaced.Turn on the ignition. [53 — Parking Brake] Basic settings — End lining change mode — Start — Adaptation of the steering rack [16 — Steering wheel] Security Access, code 40168, Basic Settings — Channel 001 — "Go" Turn the steering wheel, left or right 30° and back straight (tolerance: ± 5.0 °). Click [On/Off/Next] After successful basic configuration, field 3 should be "OK". [Done, Go Back] Turn the steering wheel to the left until it stops waiting for the beep sound, then to the right and wait for the "beep". — Adaptation of climate control dampers [08 — Auto HVAC] Basic Setting — channel 001 — Go — ON/OFF — Chain state [01 — Engine] Adv Meas Values — Camshaft adaptation intake bank 1; phase position