Rx100 Clutch plate fitting | rx 100 की clutch fit karne ka sahi tarika in full detail скачать в хорошем качестве

Rx100 Clutch plate fitting | rx 100 की clutch fit karne ka sahi tarika in full detail

Fz ki disc brake kaise thik kare fz brake problem solved Bike brakes problems solved Tank lock problem Tank lock air port problem hoe to check tank air lock problem Royal Enfield Himalaya king Rx king 👑 Access bs6 model race problem Samurai to rx silencer modification Rx 100 clutch fitting rx 100clutch overall yamaha clutch fitting Valve Grinding jugad head Valve Grinding jugad How to change drume rubber How to check play of drum rubber Discover kick Spring ka jugad discover kick Spring jugad simple jugad discover kick Spring Yamaha full Restoration Yamaha rx100 full Restoration Rx100 overall Here is a description of how to fit the clutch plate in a Yamaha RX 100 motorcycle. § 1. Start by ensuring that the motorcycle is in a well-ventilated and safe working area. It's also a good idea to have the necessary tools and a service manual for reference. 2. Begin by removing the clutch cover. This is typically located on the left side of the engine and is secured by bolts. Unscrew the bolts and carefully remove the clutch cover. 3. Once the clutch cover is removed, you will see the clutch assembly. The clutch assembly consists of the clutch basket, clutch plates, friction plates, and the pressure plate. 4. Use a clutch holding tool or a cloth to hold the clutch basket in place. This will prevent it from rotating as you work on it. 5. Start by removing the clutch pressure plate. It is usually held in place by bolts or springs. Carefully loosen the bolts or remove the springs, and then take out the pressure plate. 6. With the pressure plate removed, you can now access the clutch plates and friction plates. Check them for wear, damage, or signs of excessive heat. If they are worn out or damaged, replace them with new ones. 7. To replace the clutch plates, alternate between a clutch plate and a friction plate. Make sure they are properly aligned with the splines on the clutch basket and the notches on the pressure plate. 8. Once all the plates are in place, re-install the pressure plate. Tighten the bolts or reattach the springs to secure it. 9. Double-check that all the plates are properly aligned and seated in the clutch assembly. 10. Put the clutch cover back on and securely tighten the bolts. 11. Finally, adjust the clutch cable tension as needed. Ensure that there is proper free play in the clutch lever and that the clutch engages and disengages smoothly. It is worth noting that clutch plate fitting can be a complex task, and if you are unsure or uncomfortable performing it yourself, it is advisable to seek the assistance of a qualified mechanic. They will have the necessary expertise to ensure a proper clutch plate fitting on your Yamaha RX 100 motorcycle. I hope this description helps you with the clutch plate fitting process. If you have any further questions, feel free to ask. Happy riding Like subscribe share karo plz