1000hp Supra Build | Part 5 | Fuel Hanger Modification & Fuel Line Fab E85 E98 скачать в хорошем качестве

1000hp Supra Build | Part 5 | Fuel Hanger Modification & Fuel Line Fab E85 E98

Better late than never! In part 5 of the 1000hp Supra build we modify and install a factory fuel hanger for the mechanical pump and make our own E85 compatible braided teflon fuel lines. If you’ve never done this before it’s worth the watch! Make sure to check out other parts of this series for the fuel pump install and injector setup in the Sleeper Designs Intake Manifold. I’ll be running E98 on the dyno. Be sure to subscribe to find out the results! Follow me on instagram:   / 2jz_addict   Fittings used: Some of these were purchased from jegs or PHR. The fittings for the fuel lines and the line itself is from Frozenboost.com in Colorado Springs. *This is not the only way to do it, but it’s what I ended up doing. Depending on your rail setup, you might need two 90’ fittings instead of the two 45’s like I used. Hanger: 12AN 90’ Bulkhead fitting 12AN Jam Nut 12AN Teflon rings 12AN Check Valve 12AN Female/female coupler 3/4” OD .065 Wall Tubing 12AN Sleeve 12AN B-Nut 8AN 90’ Bulkhead fitting 8AN Jam Nut 8AN Teflon Rings 6AN 90’ Bulkhead fitting 6AN Jam Nut 6AN Teflon Rings Merge Block from PHR w/8AN, 12AN, and 10AN fittings 2x 10AN Fuel Filters Lines: 20’ of 10AN Line 10’ of 8AN Line 20’ of 6AN Line 6’ of 12AN Line Fittings: 2 - 6AN 45’ 3 - 6AN 90’ 2 - 6AN Straight 2 - 8AN 90’ 3 - 8AN 45’ 1 - 8AN 130’ 2 - 8AN Straight 2 - 10AN 45’ 2 - 10AN Straight 1 - 10AN 180’ 1 - 10AN 90’ 1 - 10AN Female/Female Coupler 1 - 10AN to 8AN Y-fitting 1 - 12AN 30’ 1 - 12AN 45’