У нас вы можете посмотреть бесплатно HOWTO: Change oil *the right way* on a Yamaha TR-1 Waverunner engine (VX, EX, Deluxe, Sport, Etc) или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
I've heard a ton of stories about how awful these engines are to maintain. I'm here to dispel those stories! Everything you need is listed in the description below: One group of people claimed the correct way to change oil on a TR1 was to remove the oil filter and start the engine until oil stops being pumped out into the hull... Besides the whole running your bearings dry, that would make a horrible mess in your hull, which would end up in the water wherever you ride eventually. NO THANKS! Other people have claimed that you can only change 1/2 the oil at a time. While that was true of the older MR1 engines, the TR1 has a means of draining nearly every drop of oil. If you follow this guide, you can change your oil in a matter of about 15 minutes with absolutely zero mess. I use a Wix 57356XP oil filter, this filter uses synthetic media rather than the more conventional paper media, and also uses a high quality silicone antidrainback valve, in my mind it is by far the best filter for your VX, EX, or any machine powered by the TR1 engine, or the MR1 engine, it will not fit the 1.8L HO engines, I do have the Wix XP number available for those engines as well if needed. Key points in video: 0:00 Introduction 0:10 What you need 1:24 Puncture oil filter & Reason for doing so 2:10 Remove sump drain hose 2:45 2 points we will extract oil from 3:30 Watch the oil zoom up that hose, That Jabsco extractor pump is a beast! 4:40 Remove filter 5:40 No mess in the hull because we punched the hole 6:30 Reassembly 7:33 Pour 1qt into valve cover plug 8:00 Add 2qt to oil tank 8:43 Start, run for 15-30 seconds then check and top up oil to full mark What you need: ➡Oil change pump: https://amzn.to/3j1TnKy ➡Oil Filter: https://amzn.to/34wYgXV ➡OEM oil filter: https://amzn.to/3L23fDd ➡Oil: https://amzn.to/3j7MeIE (Synthetic option: https://amzn.to/43fwWJ8) ➡Funnel: https://amzn.to/32rh88i ➡Strap wrench: https://amzn.to/3j91ncB ➡Screwdriver: https://amzn.to/2EeZpsC ➡Pliers: https://amzn.to/3hqrrj8 ➡Oil dry pads: https://amzn.to/32kg2uS (These absorb oil but not water) ➡Alternative oil extractor pump: https://amzn.to/3ld20Uu (I used to use this style, they work great but are slower than the Jabsco one linked above) (These links may be affiliate links, which earn me a small commission at no additional cost to you if you choose to purchase from them)