У нас вы можете посмотреть бесплатно පොටි කපන්න පුරුදු වෙමු.සරල සහ පහසුම ක්රමය или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
පොටි කපන්න පුරුදු වෙමු Applying wall putty (often called "wall putty" or "spackle") is an important step in preparing a wall for painting or other finishes. It helps in smoothing the surface and filling in cracks, holes, and imperfections. Here's a step-by-step guide on how to apply wall putty: Materials You’ll Need: #Wall putty (ready-made or powder-based) Putty knife or trowel #Sandpaper (medium to fine grit) Primer (optional) Clean cloth or sponge Water Ladder (if needed Step-by-Step Guide: 1. *Prepare the Surface:* Clean the wall thoroughly to remove any dust, dirt, or loose particles. You can use a clean cloth or sponge. If there are any cracks, old paint, or loose plaster, scrape them off using a scraper or sandpaper. Ensure the wall is dry before proceeding. 2. *Mix the Putty:* If you're using powder-based #wall putty, mix it with water as per the manufacturer's instructions to create a smooth paste. Stir thoroughly to avoid lumps. Ready-made putty doesn’t need mixing, so you can use it directly. 3. *Apply the First Coat:* Take some #putty on your putty knife or trowel and apply it to the wall. Start from the top of the wall and work your way down. Spread the putty evenly in thin layers across the surface. Avoid applying a thick layer in one go, as it may crack when drying. Use a wider trowel for larger surfaces and a narrower knife for smaller patches or cracks. 4. *Let It Dry:* Allow the first coat of putty to dry completely. Drying time can vary depending on the brand, humidity, and temperature but typically takes 4-6 hours. 5. *Sand the Surface:* Once the first coat is dry, use fine-grit sandpaper to smooth the surface. This will remove any imperfections and give the wall a smooth finish. Wipe off the dust with a clean cloth or sponge. 6. *Apply the Second Coat (if necessary):* If the wall still feels uneven after sanding, apply a second coat of putty in the same manner as the first coat. Let it dry again and then sand it for a smooth finish. 7. *Final Sanding:* Sand the surface again lightly with fine-grit sandpaper to achieve a perfectly smooth surface. 8. *Apply Primer (Optional):* For best results, especially if you’re going to paint the wall, apply a coat of primer. Primer helps the paint adhere better and provides a more uniform finish. 9. *Paint the Wall:* After the primer has dried, you can go ahead and paint the wall as desired. Tips: Avoid applying putty during very humid conditions, as it can affect the drying process. Always sand between coats for a professional finish. Make sure to use protective gear such as gloves and a mask, especially when sanding. Following these steps will give you a smooth and professional-looking finish to your wall.