How to Replace Rear Strut Shock Assemblies 2010-2014 Subaru Outback скачать в хорошем качестве

How to Replace Rear Strut Shock Assemblies 2010-2014 Subaru Outback

Buy Now! New Shock & Spring Assembly Set from 1AAuto.com https://trq.video/ia-1ASSP01535 This video shows you how to install a new shock and spring assembly designed specifically to fit your 2010-2014 Subaru Outback. A shock and spring complete assembly simplifies installation. You don't need to separate the spring from the shock absorber. This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles: 2010 Subaru Outback 2011 Subaru Outback 2012 Subaru Outback 2013 Subaru Outback 2014 Subaru Outback Tools you will need: • Flat Blade Screwdriver • Pry Bar https://trq.video/o8m-1AXAA00020 • 14mm Wrench • 17mm Wrench • 12mm Socket • 14mm Socket • 17mm Socket • 19mm Socket • Ramps • Locking Pliers • 1/2 Inch Impact Gun • 3/8 Inch Drive Ratchet • Torque Wrench https://trq.video/oa9K-1AXAA00044 • Gloves https://trq.video/oa2u-1AXSS00048 • Safety Glasses • 5mm Hex Wrench • Floor Jack • Hammer • Jack Stands • Punch • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Subaru Outback 3rd Generation 2010-2014:    • Subaru Outback 3rd Generation 2010-2014   ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.