How to Replace Exhaust Manifold Catalytic Converter Assembly 2009-2010 Pontiac Vibe 2.4L скачать в хорошем качестве

How to Replace Exhaust Manifold Catalytic Converter Assembly 2009-2010 Pontiac Vibe 2.4L

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-93-5 This video shows you how to install an exhaust manifold catalytic converter assembly on your 2009-2010 Pontiac Vibe (2.4L). This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding. This repair was done on a 2009 Pontiac Vibe GT 2.4L Wagon 4-Door FWD Manual and the process should be similar on the following vehicles: 2009 Pontiac Vibe 2010 Pontiac Vibe Tools you will need: • Pocket Screwdriver • 14mm Wrench • 10mm Socket • 12mm Socket • 14mm Socket • O2 Sensor Socket • Ratchet • Socket Extensions • Swivel • Torque Wrench https://trq.video/oahc-1AXAA00044 • Cloth Rags • Gloves https://trq.video/otX-1AXSS00048 • Rust Penetrant • Safety Glasses • Floor Jack • Sanding Block • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Pontiac Vibe 2009-2010 2nd Generation:    • Pontiac Vibe 2009-2010 2nd Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.