Expert quartet turning, milling, chamfering and grooving! скачать в хорошем качестве

Expert quartet turning, milling, chamfering and grooving!

ZCC-CT Europe knows it all! ZCC Cutting Tools Europe GmbH https://www.zccct-europe.com/ Competence turning: CNMG120408-XM YBC103 Chip breaker: XM Grade: YBC103 Vc= 260m/min Ffacing= 0.25 mm/rev d.o.c.= 1.5 mm fturning= 0.35 mm d.o.c.= 3.0 mm Added value: • Low cutting forces at high feed rates due to positive rake angle • Excellent chip control at low cutting depths due to optimally positioned chip breaker • Reinforced cutting edge to reduce chip induced damage Cost-effective milling: FMP17-050-A22-S12-05C Milling system: FMP17 Insert: SNGX1205PNN-GM YBG205H Vc= 280 m/min fz= 0.12 mm ap=5 mm ae= max. 12.5 mm Added value: • This 88° milling system with negative inserts ensures a stable cutting edge • Wide range of applications for roughing and finishing • The newly developed chip breakers create a positive insert geometry with lower cutting pressure Quality chamfering: 5601R904FM-0800 KDG303 Chamfer mills: FM series Diameter: 8 mm Point angle: 90° Vc= 250 m/min fz= 0.02 mm ap= 0.2 mm Added value: • Available with 4 and 6 cutting edges and with 60°, 90° and 120° point angle • Suitable for linear deburring or chamfering of workpiece edges and circular contour machining • Compatible for general machining Productivity Grooving: Modular grooving System zFlex Insert: ZRFD03-MG YB9320 Vc = 250 m/min fturning = 0.6 mm/rev ap = 0.36 mm Added value: • Flexibly assemble components consisting of a basic holder, basic cassette and a primary cassette • It can be used for any grooving operation • Due to the specially developed spring tension of the primary cassette, no plastic deformations occur even after multiple clamping operations