Steel Dapping Punches & Disc Cutter Set скачать в хорошем качестве

Steel Dapping Punches & Disc Cutter Set

Steel Dapping Set: Made from heavy-duty steel, this set includes 18 pieces of dapping punches to meet your specific metal forming and jewelry making/repair needs. It also features a matching 2" x 2" dapping black, plus a wooden base with sizing etched in to match each specific dapping punch piece. Designed with the following sizes: 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 15 mm, 17 mm, 19 mm, 24 mm, 28 mm, 33 mm, and 38 mm. 5-Piece Disc Cutter Set: Easily cut and punch your metals into perfect circles in four different sizes: 1/2", 5/8", 3/4", 7/8", and 1"! Made from high-density steel. Cuts soft metals up to 18 gauge. Use a disc cutter on either a bench block or pad for support. We also recommend applying a cutting lubricant such as "Cut Lube" to the edges of the punch. Use a suitable mallet, such as a 1 lb or 2 lb brass mallet (never a nail-driving hammer). Always support the opposite side of the cutter with a sheet of the same diameter metal that you are cutting (this will help keep the upper and lower parts of the disc cutter in alignment and minimize material sticking in the disc cutter). Do not exceed the maximum thickness recommended for your disc cutter. Only cut soft non-ferrous metals such as brass, copper, silver, and gold. Make sure that your cutting edges are down. To prevent rust, keep your disc cutter well-lubricated between use and store in a dry location. 6" x 6" x 1/16" Red Precision Urethane Pad: Perfect for using as a cushion for your disc cutter! It provides excellent shock absorption, abrasion-resistance, and dimension stability. It is also non-marking and non-staining. Measures: 6" wide x 6" in length x 1/6" thick; 95 durometer. Buy it here: https://tinyurl.com/y5akzwp3 #PMCSupplies #MetalForming #JewelryMakingTools ©PMC Supplies, LLC