Скачать с ютуб Making A Knurling Tool For The Lathe в хорошем качестве

Making A Knurling Tool For The Lathe

G'day everyone, Fore the last project of the year I thought I might as well get around to doing a project that has been on my list for quite some time. And that is to make a new knurling tool. My old one is a bump style (or push type) knurler and whilst they are great for larger lathes, they do require quite a lot of force to use, and according to the machining zeitgeist, that is very bad for the spindle bearings. The new style that I will make is a clamp style. It will use a screw to clamp the two pattern wheels on to the workpiece, which should save the spindle bearings. This seems to be quite similar to a scissor type knurl tool and I have no idea if there is an advantage to one type. All I know is the clamp style works and it works well. I hope you enjoy the video Lathe - Hafco Al250g Mill - Sieg x2.7l #machining #diy #lathe Timestamps 0:00 - Intro 2:17 - Making The Main Body 5:36 - Making The Roller Arms 12:25 - Making A M8 x 1.25 Left Hand Tap 18:54 - Making The Leadscrew 21:26 - Making The Roller Pins 23:38 - Making The Backplate 25:05 - Final Assembly and Testing