[Easy] How to make a TV-B-GONE with an Arduino скачать в хорошем качестве

[Easy] How to make a TV-B-GONE with an Arduino

[Please Read! Important! DOWNLOADS LINKS DOWN HERE] In this Tutorial I am going to show you how to make a simple TV-B-GONE with an Arduino UNO. Things You will need: 1 or more Infrared LED (you can get them from an old TV remote or buy them cheap online) A few jumper cable Optional: A button (if you don't have a button, connect pin 1 directly to Ground. The Arduino will start sending the codes as soon as you turn it on) A Status LED. (You can leave it out and the led on the Arduino Board will light up instead) Software Stuff: The Arduino Libary: https://mega.nz/#!L4VSxRID!ZIUI9pqyO-... OR http://www.mediafire.com/?935y0xxn9ua... Unzip the file and put the TVBGONE folder into your libraries folder in your Arduino installation path. The Arduino IDE: (You have to use version 1.0.6!) https://www.arduino.cc/en/Main/OldSof... If you want to take the project a little bit further you can solder your own shield like me in the intro. It is more professional and much nicer than on the breadboard. Good Luck!