John Deere 345 Plastic cam - FD590V Internal Parts - Part 2/2 скачать в хорошем качестве

John Deere 345 Plastic cam - FD590V Internal Parts - Part 2/2

Gen1 345 engine removal to replace plastic cam (Serial number less than 70000) Part 1:    • John Deere 345 Plastic cam - FD590V Engine...   Notes: I also replaced the valve springs. I used the rope trick (remove spark plug, fill cylinder with a thin nylon rope) to keep pressure on the valves during spring removal. Without a specialized tool, it took two people to compress the spring and put the magnetic keepers back in. The old springs seemed in-spec but I had replacements on hand. Torques Oil pump cap screws: 69 in-lb (7.8 nm) Fuel pump cap screws: 150 in-lb (17 nm) Water pump cover-to-crankcase cap screw: 186 in-lb (21 nm) Water pump pump-to-cover cap screw: 78 in-lb (9 nm) Governor arm clamp nut: 69 in-lb (7.8 nm) Crankcase cover cap screws: 186 in-lb (21 nm) Rocker arm jam nut: 79 in-lb (9 nm) Rocker cover cap screws: 53 in-lb (6 nm) Spark plug: 150 in-lb (17 nm) Engine mount to frame cap screws: 30 ft-lb (41 nm) Oil drain plug: 221 in-lb (25 nm)