Point 2 Point: Leica RTK Rover using NTRIP correction v10 Firmware-off GS18NTRIP Base скачать в хорошем качестве

Point 2 Point: Leica RTK Rover using NTRIP correction v10 Firmware-off GS18NTRIP Base

00: 00 Introduction -NTRIP rover overview 00:30 Overview Base (video 1) Static IP APNs 00:55 APN options for rovers- DAC SIM Card overview Multi carrier option 01:40 FW v10 Captivate for NTRIP Base- thus allows Drones and/or RTK rovers to work off base 02:10 Example of stake point under 1cm Horizontal and vertical- extremely accurate 02:30 Settings on Leica Rover- SIM Card and APN for Internet 03:10 RTK settings of workstyle ensure using RTCM V3 data 03:45 Select server define NTRIP settings IP, Port and UN and PW 04:15 Select verify Mountpoint for GS18 Base 05:45 Load Workstyle on CC180 06:15 Check SIM settings and APN 06:45 Bluetooth to GS sensor (First time setup) 07:00 Select job with check points and then access Measure application 07:45 Access NTRIP server and check-define settings IP, Port, Ntrip UN & PW and check correct Mountpoint 09:45 "Start stream RTK Data" key to receive rtk corrections from base and then fix 10:30 Stake out Check point, to ensure base is on correct point before working on project. 11:45 Check Baseline length to base and RTK status info, other options to ensure getting data from your distinct base 12:45 Review real time data and look at CQs 1D vertical 2D horizontal all under 1cm - to ensure good RTK data and tight RTK data for job