Tooltip INE-200 - Fitting of a demo lens with basic beveling. скачать в хорошем качестве

Tooltip INE-200 - Fitting of a demo lens with basic beveling.

Tooltip INE-200 - Fitting of a demo lens with basic beveling. 1. Draw a horizontal line in the center of the demo lens, and paste a block align with the line. 2. Place the blocked demo lens on the pattern jig, and place on the INT-200 (tracer) and select “Demo lens” and press “Right / Left” button on the tracer. 3. After tracing is completed, traced job will appear in the screen of INE-200, the Edger. 4. Place a lens on the INB-200 (Blocker), insert a block on the holder of blocking arm, adjust the optical center and swing the blocking arm to the lens position, and press to block. 5. Enter the prescribed values in the screen. 6. Insert a blocked lens in the cupholder in the edging room, and press start. 7.The window is automatically shut down, and the feelers start to feel the lens inserted. 8. After the feeling is completed, the edging process is started. 9. When the lens processing is completed, the window will automatically open with “beep” sound. 10. Take out the lens from the edging room, and wipe off water on the lens with a microfiber cloth. 11. Insert the processed lens to the frame, and check the fitting tightness. 12. Using a block remover, remove the block from the lens, and wipe off water residue. 13. A lens is fitted to the frame nice and perfectly; you may repeat this process one more time for the other side. https://www.iineer.com/en/