У нас вы можете посмотреть бесплатно stonecolor English или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
IsoStoneColor is a specially developed product for painting and surface treatment of coatings indoors and outdoors on absorbent or porous surfaces made of concrete, limestone, terracott a and clinker bricks. These types of coatings typically exist on surfaces such as entrance points, garage fl oors, common rooms, bathrooms, terraces and around swimming pools, however, the product is also highly useful on large public areas and surfaces, including fl oors in industry halls with one of the previously mentioned surface coatings. Following careful cleaning to remove grease, dirt, dust, etc., Iso StoneColor is applied on the surface. Depending on the type of surface and for how long dust and dirt have been building up, use of Iso StoneCleaner Extrem is recommended. Aft er careful cleaning with Iso StoneCleaner, wash off or rinse the surface with normal cold or tepid water. Allow the surface to dry thoroughly for approx. 4 12 hours depending on the weather and ambient temperature. Then apply Iso StoneColor directly onto the cleaned surface with 1 litre for each 3 8 square metres depending on the application method and the surface condition and absorbency. In case of severely degraded or porous surfaces, priming with colourless Iso StoneColor Primer is recommended, possibly adding 10 20% Iso StoneColor in the desired colour to achieve optimum priming colour. To maintain the original appearance of the coating and only reinforce the surface, exclusive use of colourless Iso StoneColor Primer in one or two coats depending on the desired degree of surface protection is also possible. When treating surfaces with Iso Stone- Color, the best results are obtained by applying Iso StoneColor 2 times with a break of approx. 4 hours in between. Depending on the weather conditions, treated surfaces can be used for light passenger traffi c again aft er approx. 12 hours and for more intensive vehicle traffi c aft er minimum 24 hours. Full penetration hardening will be realized aft er approximately 5 days.