07-14 Escalade headlight opening and reseal скачать в хорошем качестве

07-14 Escalade headlight opening and reseal

Here I open the factory headlight housing because of moisture behind the lens. It's a fairly straight forward job. I heated the oven to 240 degrees for 10 minutes. And tried to open the housing. It didn't open easily so I put back in for another 8 minutes or so. I was able to open the housing at that point. I recommend getting a pair of pliers that open when you squeeze the handle (similar to c-clamp retainer pliers). Clean everything up added new butyl to the contact point. 1 bead all the way around. Heated u the housing and new butyl for 15 minutes on 240 degrees. Removed it from the oven and immediately started clamping everything down. Reattached what I removed and installed. Wala it worked. It's been raining for like 5 days here and it's condensation free. (P.S. be very cautious about rubbing the internal silver reflective coating It is extremely thin and will rub off, even with a glass towel and water. VERY THIN!) Good luck!