RiiRoo 2020 ChooChoo™ Electric Train 12v Kids Electric Ride On Train Assembly Instructions скачать в хорошем качестве

RiiRoo 2020 ChooChoo™ Electric Train 12v Kids Electric Ride On Train Assembly Instructions

Here is the RiiRoo 2020 ChooChoo™ Electric Train 12v Kids Electric Ride On Train Assembly Instructions. RESOURCES & LINKS: ____________________________________________ For more info on this bike, visit: https://bit.ly/RiiRoo2020ChooChooTrain Our ride-on cars - https://riiroo.com/collections/ride-o... Our ride-on motorbikes - https://riiroo.com/collections/electr... Our ride-on scooters - https://riiroo.com/collections/riiroo... ____________________________________________ Here are the instructions: 1. Take a look at the parts list and ensure you have all the items to build. 2. Please refer to the parts list in the manual. 3. Protect and place the train on a flat surface. 4. For the front wheels, ensure the assembly order of the hardware is as follows - washer - wheel - washer - & finally the nut 5. Attach the front wheel trim to the relative gaps on the wheel. 6. Repeat process on the other side. 7. Insert the rear axle through the holes on the bottom of the train. 8. Thread the multiplug wire attached to the motor through the hole in the body of the train. 9. Line up the motor with the axle & the hole in the body of the train. 10. Insert the rear axle through the holes in the motor and the body of the car. 11. For the rear wheels, ensure the assembly order of the hardware is as follows - wheel - washer - & finally the split pin. 12. Attach the rear wheel trim to the relative gaps on the wheel. 13. Repeat process on the other side. 14. Attach the rear wheel trim to the relative gaps on the wheel. 15. Remove nut & bolt from the steering wheel. 16. Connect the steering wheel wire to the multiplug protruding from the front of the train. 17. Ensure the wire is threaded back through the hole once connected to prevent damage. 18. Ensure the steering wheel is lined up with the hole on the steering rod. 19. Secure the steering wheel with the nut & bolt that was previously removed. 20. Line up the seat lid with the holes on the seat. 21. Secure it with screws. 22. Insert the seat into the back of the train. 23. Insert the axle through the holes in the bottom of the carriage. 24. For the carriage, wheels ensure the assembly order of hardware is as follows – spacer – washer – wheel – washer & finally the split pin. 25. Attach the wheel trim to the relative gaps on the wheel. 26. Repeat process on the other side. 27. Insert the trailer bar into the relevant gaps on the bottom of the carriage. 28. Secure it with screws. 29. Insert the carriage handlebar into the hole on top of the carriage. 30. Line up the trailer bar with the hole on the back of the train. 31. Line up the trailer bush with the holes on the trailer bar & train. 32. Insert the bolt through the holes on the trailer bar. 33. Secure it with a washer & split pin. 34. Connect the battery terminal & motor multiplugs. 35. Once the battery terminals are connected, check to see if the car powers up. ► If you need help choosing a ride-on toy for a present, then check us out @ https://riiroo.com/ ►Subscribe: http://bit.ly/RiiRooSubscribe to see more videos on our ride-on toys. ►Find us on Facebook:   / riirooltd   #RiiRoo2020ChooChooElectricTrain #ChooChooElectricTrain #RiiRoo