Motorcycle Camper Electric Trailer Brake Installation and Adjustment скачать в хорошем качестве

Motorcycle Camper Electric Trailer Brake Installation and Adjustment

In this video, I'm installing and adjusting a set of electric brakes on a Time Out Deluxe motorcycle camper. For more information about motorcycle campers, motorcycle hitches and wiring kits, check out my site at OpenRoadOutfitters.com. ----- I said I'd include a list of tools used in the process, so here it is. For removing and reinstalling the hubs, I used a soft-faced mallet, a flat blade screw driver, a pair of needle-nose pliers to remove the cotter pin and slip joint pliers to remove the castle nut. For installing the electric brake assemblies, I recommend you find an open-end 11/16 wrench. Space is tight on the back of the brake assembly and there are some nuts that you can only tighten with an open-end wrench. For wiring the brakes, what you need will depend on whether you choose to solder the connections or use crimp connectors. I soldered these, so I used a soldering iron and rosin-core solder, heatshrink to cover the connections, a wire stripper/cutter and a heat gun. You'll need other tools to remove the lugs and take off the coupler to run the wiring harness. The lugs were 11/16 and the bolts on the tongue required a 9/16 wrench.