Русские видео

Сейчас в тренде

Иностранные видео




Если кнопки скачивания не загрузились НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием, пожалуйста напишите в поддержку по адресу внизу страницы.
Спасибо за использование сервиса savevideohd.ru



SDS Plus Drill Bit Chuck Adapter to Convert Rotary Hammer into Drill Driver

With this SDS Plus drill bit chuck adapter you can transform your rotary hammer tool into a drill driver, ready to penetrate materials like wood, steel and plastic. The smallest drill bit this SDS Plus chuck adapter can hold is 1.5mm ~ 0.059inch, and the biggest drill bit is 13mm ~ 0.511inch. You can use even bigger drill bits, as long as they have smaller base, just like I demonstrate in the video. The kit comes in three pieces - the chuck itself; an SDS adapter, which screws-in the chuck; and a key, which is used to tighten the hold of the drill bits. Keep in mind that the screw, which is used to connect the SDS plus adapter to the drill chuck, has to be screwed in counterclockwise. For best results when drilling into wood and steel using this chuck adapter, your rotary hammer needs to have a "drill only" option, just like my makita rotary hammer, which I used in the video. Same chuck on Amazon: https://ebay.to/43ReuYx #SDSPlusAdapter #SDSPlusChuckAdapter #RotaryHammer #DrillDriver #DrillBitAdapter Support the channel! Like the vide:    • SDS Plus Drill Bit Chuck Adapter to C...   Subscribe:    / reviewthecheapest  

Comments