Reviewing of DH 64 Digital Battery Load Tester فاحص بطارية السيارة UPDATED 2022 скачать в хорошем качестве

Reviewing of DH 64 Digital Battery Load Tester فاحص بطارية السيارة UPDATED 2022

Reviewing of DH-64 Digital Battery Load Tester فاحص بطارية السيارة_UPDATED 2022 Chapters of this video : 01:36 Instruction Manual 02:50 Description 03:55 Battery 1 Check 06:16 Battery 2 Check 08:14 Battery 3 Check 10:14 Battery 4 Check 12:30 Battery 5 Check 14:07 Battery 6 Check 15:47 Charging System Test (simulation model for illustration only) Digital Battery Load Tester This 6V 12V Truck Battery Load Tester Battery can test 6 or 12 volt batteries, hardtop batteries, discharged batteries, maintenance free batteries and lead-acid batteries. Besides, it also can be used for built-in starter test. It can quickly distinguishes a good from a bad battery in 30 seconds. Product Details Digital Battery Load Tester Description: IDEAL FOR CARS ,VANS RVS AND FARM VEHICLES : Suitable for 6v-12v lead acid batteries Compact and portable ,ideal for garages and fleet users Strong yet lightweight steel construcfion with integrated handle and clamp holders heavy duty insulated clamps easy and safe to use , no sparking large LED display gives battery voltage 3LED display indicates if battery : BAD ,WEAK OR GOOD Technical Parameter： Testing 6 and 12 VDC battery tester Capability Load Test 100 amps Capacity 500 ~ 1000 cold cranking amps Display Meters Analog, 0 ~ 16 VDC (max.) Test Cycle 10 seconds per test with 1 minute cool down 3 tests in 5 minutes Battery Cable 16-3/4 IN. long including clamps Clamps Copper plated clamps Instructions For Use: 1.To help ensure a good connection, wipe the battery terminals with a cloth to remove any dirt and grease. 2.Connect the red (positive) Cable Clamp to the positive terminal (+) on the 6 or 12V lead-acid battery. 3.Connect the black (negative) Cable Clamp to the negative terminal ( –) on the battery. Turn clamps slightly to ensure a good connection. 4.With the clamps connected, the tester’s gauge will show the battery’s current charge. If it is less than 12V, disconnect the battery and recharge before testing. If the recharging will not bring the reading above 12V, the battery is defective. If it shows no reading, verify that the tester is connected properly. If the tester is connected properly, the battery is defective. 5.Press (and hold) the Toggle Switch for at least 5 seconds to simulate an actual load on the battery. View the Meter Display and read the battery condition. 6.Release the Toggle Switch and remove the Cable Clamps from the battery. https://www.aliexpress.com/item/32825... https://www.aliexpress.com/item/32825... WARNING: This video is for demonstration and educational purposes only. Each demonstration presents risks and hazards that must be fully understood before attempting. And should be performed only by professionals Disclaimer: The information, demonstration, and any content contained in this video are for informational purposes only. PLEASE READ Warning… do this at your own risk. I am not responsible for what you do to your device. MUSIC: Track title: Drop - Anno Domini Beats From: YouTube Audio library IMAGE: Quranic Dua #35 (Surah al-Ahqaf) From: https://quranicquotes.com/topic/dua/p... I have approval from the site https://quranicquotes.com to use the images