The Ultimate HOTAS Mount 👌 Virpil Throttel and Flightstick + Elgato Stream Deck on Linear Rails скачать в хорошем качестве

The Ultimate HOTAS Mount 👌 Virpil Throttel and Flightstick + Elgato Stream Deck on Linear Rails

Easy transition between Keyboard & Mouse, Dual Stick, and HOTAS! Virpil VPC MongoosT-50CM3 Throttle Virpil VPC Constellation ALPHA-L/ALPHA-R on VPC WarBRD Base Elgato Stream Deck Find a full bill of materials and all print files for free on Thingiverse: https://www.thingiverse.com/thing:491... Mount your Virpil Throttle and Stick to linear rails so you can slide them along your desk. This allows you to move your HOTAS aside when you use the computer for other work. When flying your aircraft or spaceship, a spring-loaded locking meachanism holds your HOTAS securely in place. The files are designed for the VPC Desk Mount V2/V3: https://virpil-controls.eu/vpc-desk-m... which is compatible with the VPC MongoosT-50 Throttle. An adapter plate for Virpil Flightsticks (VPC WarBRD Base) is included (with and without a mounting option for the 15 button Elgato Stream Deck (MK.1). MongoosT Base untested. ADDITIONAL HARDWARE (per Throttle / per Stick) A VPC WarBRD Base with Grip (I am using VPC Constellation ALPHA-L / ALPHA-R) or a VPC MongoosT-50CM2 / 50CM3 Throttle, and one VPC Desk Mount V2/V3. For each Mount: Table top / countertop: solid wood or butcher block Inner roller bearing linear guide: 2x SGR10-1000L or *2x SGR10-500L https://www.robotdigg.com/product/867 Wood Screws: M3 or equivalent (as long as your table top is thick) I used #6 x 1-in Flat Head screws (which is the upper limit the linear guide will be able to handle) V Type Ball Bearing Roller with 4 Bearings: 2x SGR10B4 https://www.robotdigg.com/product/867 Nested Semi Closed Drag Chain: BCZAMD 10X11mm, Bending radius: R18, Length: 1M https://www.amazon.com/gp/product/B07... Metric screws: 6 x M2.5, 3mm long 90 Degree Countersink Flat Head (Laptop) Screw to fasten the drag chain to the Chain_start and Chain_end parts 8 x M4 × 0.7 mm, 20 mm long 90 Degree Countersink Flat Head Screw to connect the Ball Bearing Roller to Throttle_top or Stick_top part 1x 0.5mmx12mmx30mm 304 Stainless Steel Compression Spring (uxcell) https://www.amazon.com/dp/B076LRMLLL Super Glue: Cyanoacrylate (and accelerator) - for example Pen Kit Mall MAXI-CURE and INSTA-SET to glue VPC_Desk_Mount_Rail_Adapter-Chain_end.obj to VPC_Desk_Mount_Rail_Adapter-Throttle_top.obj or VPC_Desk_Mount_Rail_Adapter-Stick_top.obj (this was the easiest solution) For each Stick: 6x M5 x 0.8 mm Hex Nut to connect Stick_top part to Stick_bottom part 6x M5 x 0.8 mm, 65 mm long 90 Degree Countersink Flat Head Screw to connect Stick_bottom part to Stick_top part For each Throttle: 6x M5 x 0.8 mm Hex Nut to connect Throttle_top part to Throttle_bottom part 6x M5 x 0.8 mm, 30 mm long 90 Degree Countersink Flat Head Screw to connect Throttle_bottom part to Throttle_top part Additionally for the VPC WarBRD Base adapter plate: 4x M5 x 0.8 mm Hex Nut 4x M5 x 0.8 mm, 16 mm long Socket Head Screw (come with the VPC Desk Mount V2/V3) Print files and instructions for free on Thingiverse: https://www.thingiverse.com/thing:491... Music: Kick Shock by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/... Source: http://incompetech.com/music/royalty-... Artist: http://incompetech.com/