У нас вы можете посмотреть бесплатно HONDA CB 350 RS | WORTH MORE MONEY? | IN HINDI | NIGHT DRIVE INCLUDED| или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
✅ Pros of the CB350 RS Engine 1. Strong Mid-Range Torque The engine delivers ~30 Nm torque at 3,000 rpm, which gives brisk pull in urban and semi-highway speeds without always needing to rev hard.  2. Smooth & Refined Operation Owners report that the engine is smooth, with minimal vibrations at typical riding speeds. It doesn’t feel harsh, which makes commuting and touring more comfortable.  3. Assist & Slipper Clutch Helps in reducing engine braking drama during aggressive downshifts and offers lighter clutch pull, which improves riding comfort in stop-and-go trafffic.  4. Fuel Injection (PGM-FI) Allows more precise fuel delivery and better cold starts, throttle response, and consistency than a carbureted engine would. Helps with both performance and emission/compliance.  5. Reliability Backed by Honda’s Engineering Many owners say the engine has been dependable, showing fewer breakdowns, consistent start behavior, and capable of handling both city and hilly terrain without serious issues (when properly maintained).  ⸻ ❌ Cons / Trade-Offs of the CB350 RS Engine 1. Lack of Bottom-End “Snap” / Low-RPM Power While mid-range torque is good, from reviews and owner reports, starts from low rpm (first gear or with loads / pillion) need more clutch work or frequent gear changes. The engine feels less eager at very low revs.  2. Tall Gearing The gear ratios are such that in-gear acceleration sometimes feels muted; to overtake or get strong pull you may need to downshift. This means more shifting especially in hilly or stop-start traffic.  3. Heat & Cooling Limitations (Air-Cooled Engine) As an air-cooled 348 cc single, in heavy traffic, slow speeds, or hot climate, the engine heats up more. Heat transfer is slower compared to oil-cooled or liquid-cooled designs.  4. Vibration and Engine Noise under High RPM At higher revs, or when pushed hard, some vibration creeps in (handlebar, footpegs) as well as noise. Not a dealbreaker, but noticeable for riders who expect silence and smoothness at all rpm.  5. Maintenance & Part Wear Issues Some users mention things like tappet noise or valve clearance problems emerging with usage. Also, there have been reports of oil leaks (valve cover gasket etc.), sensor issues, and other assembly-quality related concerns affecting the engine experience.  6. Performance Ceiling for Highway or Loaded Use When fully loaded (pillion, luggage) or on steep inclines / highways, the engine is competent but not overwhelming. Riders expecting blistering performance will find it limited. Doing overtakes may require downshifts; long sustained high speeds may feel the limits of the air‐cooled single.  ⸻ ⚙️ More Context / Trade-Off Reasons • Air cooling saves weight, complexity, and maintenance, but because it depends on air flow/fins to dissipate heat, it’s less efficient under certain conditions (idle in traffic, hot weather, heavy load). • The engine’s design seems to favour torque in the mid RPM band rather than peak horsepower or very high rpm horsepower, which is good for comfort and usability, less so for sporty/high-speed thrill. • Honda’s engine is built with durability in mind, so some compromises (heavier parts, conservative tuning) help with life expectancy but can slightly reduce “aggro” (i.e. sporty feel) for riders wanting maximum performance. #bikelover #hondacb350rs #honda #bike #bullet #royalenfield #motorcyclereview #automobile #jawa42bobber #jawa42bs6 #viralreview #newbike