Redcat University - RCR-2CE and R-3E Receiver Bind Process скачать в хорошем качестве

Redcat University - RCR-2CE and R-3E Receiver Bind Process

In this RCU Tech Video - we are going to show you the binding process for the RCR-2CE and R-3E Receiver. This will help anyone who needs to know how to bind a 2 channel remote to a 2 channel receiver that has unbound from the remote or if one of these 2 parts has been replaced. 1. First - Make sure the vehicle and controller are powered OFF. 2. Insert the bind plug into the channel 4 "VCC" port on the R-3E receiver. 3. Turn on the power to the vehicle; this should give you a flashing red light on the receiver. 4. While holding the bind button on the controller, turn on the power to the radio. - This should give you a flashing green light on the radio, and now the receiver light should blink slowly. 5. Power the radio and vehicle off. 6. Remove the bind plug from the receiver. 7. Turn everything on as normal - remote control first and vehicle second - you should be good to go. Be sure to look for our RCU Tech Video covering the proper Receiver wiring of the Servo and ESC(Electronic Speed Control) as well.    • Redcat University - Receiver ESC+Servo Wir...   If you need to program the RCR-2CE to an older Part # 28479 receiver you can check this video out here:    • Redcat University - RCR 2CE Programming to...   Any questions feel free to ask and if you would like to see any other how-to videos please let us know what you would like to see. If you have any direct questions at this time feel free to email Redcat Racing support team for assistance at: [email protected] We will reply to you as soon as possible and help out! You can also call in Monday through Friday 8AM-4:30PM Arizona Time. @ 1-602-454-6445 Thanks for Racing Redcat! Follow Redcat Racing Website: http://www.redcatracing.com/ Youtube:    / redcatra.  . Instagram:   / redcatracing   Facebook:   / redcatracing   Twitter:   / redcatracing