Replacing the timing belt. Audi A6C5 2.5 TDI V6. скачать в хорошем качестве

Replacing the timing belt. Audi A6C5 2.5 TDI V6.

The process of replacing the timing belt is shown in this video. For proper replacement you need: remove before and all radiators (so much more convenient) set the mark TDC (for this you need a special crankshaft lock, lock pump pump - 6 mm drill bit, camshaft locks - plate about 4.5 mm) remove the camshaft pulley from the left head remove the timing belt replace the thermostat (while you can) replace the pump and rollers install a new timing belt tighten the belt - remove the pin from the hydraulic tensioner and then follow the instructions to turn the tensioning roller counterclockwise 15 N / m counterclockwise (for orientation, the tensioner rod should rise 3-5 mm) clamp the camshaft bolts (it is better to remove the clips) while holding the special pulleys with a key remove all latches and crank the crankshaft 2 full turns; install all latches - if the marks match, the timing is set correctly. If they do not match, then again we tear off the pulleys of the RV and reinstall the belt. install the stove Set the pump belt We put a ribbed belt we collect before.