Hyundai/Kia MG7.9.8 скачать в хорошем качестве

Hyundai/Kia MG7.9.8

MG7 ECU 7.9.8 – IMMO OFF Process (General Overview)A1. Identify ECU Type ECU version ME7.9.8 is common in MG/Rover and some SAIC models. It's usually a Bosch ME7.9.8 ECU. 2. Read the ECU Flash You'll need: KESS V2, KTag, MPPS, or similar OBD/bootmode tools Backup both: FLASH (usually 512KB or 1024KB) EEPROM (usually 256B or 1KB, depending on version) 3. Patch the File Use an IMMO OFF software or a hex editor with known immo-off dumps or scripts: Tools like IMMO Universal Decoding, ECU Titanium, or WinOLS Look for known ME7.9.8 immo-off patterns (these involve changing specific bytes) 4. Write Back the Modified File Reflash the ECU via your tuning tool Clear any DTCs if needed (using tools like Delphi, Autocom, or INPA) 5. Test the Vehicle The car should start without needing the immobilizer signal. If there's a CEL (Check Engine Light), it may need checksum correction or additional patching.