1974 Porsche 911 coupe: Case drill, tap and Case Saver Installation [4K] Ep110 скачать в хорошем качестве

1974 Porsche 911 coupe: Case drill, tap and Case Saver Installation [4K] Ep110

Last time, I realized that I had head studs that have pulled away from the block. Lost about half of them as they ripped the threads out when I removed them. While not a good situation, this is all to common on the 2.7L Magnesium cases. I will set up my quality drill press and drill and tap holes for threaded inserts. I will discuss the different kind of threaded inserts you can use and why I chose the ones I did. I will also drill/tap and set another insert in the middle of the block that commonly pulls out. Not too difficult to do, but tool setup is going to be key here. 0:00 Intro 0:18 Planning for drilling. 1:12 Tools used for drilling and tapping 4:21 Align chuck to table 5:58 Drill holes on the left case, cylinder #2 7:06 Tap hole on the left case cylinder #2 8:11 Drill and tap hole for cylinder #1 8:51 Importance of clearing tap flutes 9:11 Use aluminum blocks to drill right side case 9:36 Drill and tap M8 case stud near intermediate shaft 11:27 Depth of thread measurement is critical 13:19 Testing depth of threads cut with tap 14:18 Tapping holes with bottoming tap for clearance 14:50 Discuss results of my machine work 16:38 Plans for reassembly 17:10 Sometimes I have a difficult time getting started Donate to support this channel: https://www.paypal.com/paypalme/after... Find me on Facebook:   / afternoongarage   Find me also on Instagram:   / afternoongarage