2019 FOX Factory Series 36 FLOAT GRIP 2 Full Service guide for beginners. WEAR your safety glasses! скачать в хорошем качестве

2019 FOX Factory Series 36 FLOAT GRIP 2 Full Service guide for beginners. WEAR your safety glasses!

This is a step-by-step full service guide video for fully servicing a 2019 Fox Factory Series 36 Float Grip 2 damper fork. The video is a bit lengthy, my apologies for this, but my goal is to make this guide as easy as possible to follow for those all around the world who might be intimidated by performing this service. The fork in this video is a 2019 NON VVC version. The NON VVC and VVC versions are very similar, but they use different service kits. I show the differences between the two kits in the video. Make sure to verify the damper version by year on your fork in order to ensure you purchase the appropriate damper service kit. During the damper portion of the service, you will see a perfect example of why you should ALWAYS wear safety glasses. Though it was the camera that got sprayed, it could have easily been my eyes if it had sprayed in a different direction. Servicing this fork is easy, IMO. Not many special tools are needed. I'm very confident that you can perform this service. As always, If you have any questions, feel free to leave them in the comments section below, and I will answer them the first chance I get.  Chapters 00:00 Intro and tools needed 09:26 50-hour Service Part 1 Removal 21:37 Air spring service 42:07 GRIP 2 Damper Service 01:35:10 50-hour service part 2, install For those interested in building their own tools, as seen at 02:15, out of couplers. the threads are as follows, Metric 8mm x 1.00 Fine thread 10mm x 1.00 Extra Fine thread