DIY How to Replace Spark Plugs 2017 Volkswagen Tiguan скачать в хорошем качестве

DIY How to Replace Spark Plugs 2017 Volkswagen Tiguan

This video shows you how to replace the ignition coils and spark plugs on your 2009–2017 Volkswagen Tiguan. If your 2.0T engine is hesitating, misfiring, or your fuel economy has tanked, it’s usually time for a fresh set of plugs. This is a very common maintenance task for the EA888 engine, and we’ll show you how to swap them in about 30 minutes using a few basic tools. This repair was performed on a 2017 Volkswagen Tiguan (First Generation / Limited) and applies to: 2009–2017 Volkswagen Tiguan (All trims with 2.0T TSI engine) (Also applies to the 2018 Tiguan Limited) Parts & Specifications Spark Plugs: VW Part # 06K-905-601-B (NGK PLFER7A8EG) or 101-905-631-B (Bosch FR6KPP332S) Ignition Coils: VW Part # 06E-905-115-G (The "Red" R8 coils are a popular performance upgrade!) Spark Plug Gap: 0.032" (0.8mm) Spark Plug Torque: 18–22 lb-ft (25–30 Nm) Ignition Coil Ground Nut Torque: 7 lb-ft (9-10 Nm) — Caution: These small studs are easy to snap! Service Interval: Every 40,000 to 60,000 miles (standard) or every 20,000 miles if your Tiguan is "tuned." Tools you will need: 5/8-inch (16mm) Spark Plug Socket 10mm Socket (for the ground wire nuts and coil studs) 3/8-inch Drive Torque Wrench 6-inch Extension Bar Small Flathead Screwdriver (to release the electrical connectors) Dielectric Grease (optional, for the coil boots) Gloves & Safety Glasses Steps Covered: Engine Cover: Pulling the plastic cover straight up off its four mounting pins. Ground Wires: Using your 10mm socket to remove the nuts holding the ground wires to the coil studs. Electrical Connectors: Using a screwdriver to gently pull the gray or black locking tabs back before sliding the harness off the coils. Coil Removal: Pulling the ignition coils straight up. If they are stuck, a gentle "wiggle" or a coil puller tool can help. The Old Plugs: Removing the plugs and inspecting the tips for signs of carbon buildup or oil fouling. Installation: Hand-starting the new plugs to avoid cross-threading, then torquing to 22 lb-ft. Reassembly: Reinstalling the coils, ground wires, and harness connectors until they "click." Subscribe: / @MechanicRepairs 2017 VW Tiguan, Volkswagen Tiguan spark plug replacement, 2.0T TSI spark plugs, 2012-2017 Tiguan maintenance, VW EA888 spark plug gap, Tiguan ignition coil DIY, 06K905601B, Bosch FR6KPP332S, DIY auto repair, MechanicRepairs, Mission Viejo VW repair, VW engine misfire fix, 17 Tiguan spark plug torque DISCLAIMER: While MechanicRepairs strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. MechanicRepairs is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.