#84 Oak Burr (Burl) Woodturning Wall Sculpture Project скачать в хорошем качестве

#84 Oak Burr (Burl) Woodturning Wall Sculpture Project

Thoroughly enjoyed turning this weeks woodturning project video of a 21x13" oak burr (burl) wall hanging sculptural art piece. The main turning was done using a large plywood faceplate attached to a 130mm steel faceplate to give the piece as much stability as possible. After it was flattened down a bit, the rings were put in with a 3/8" bowl gouge before hand sanding and lightly burning the high points of the rings with a small blow torch, The colour was then applied. I used Ruby, Earth and Burnt Orange from my Intrinsic Colour Collection before overcoating that with danish oil. Finally, a few coats of Hampshire Sheen Microcrystalline Wax was used in the 'Red Centre' to shine it up a bit. Hampshire Sheen: Find your nearest retailer: http://www.hampshiresheen.com Something else of interest: Read my FREE newspaper at http://www.turnersrest.com The UK & Ireland Woodturning Symposium: http://www.ukiws.co.uk Keep up with my socially! Facebook:   / msabansmith   Twitter:   / msabansmith   Google+: https://plus.google.com/+Msabansmith/ Instagram:   / msabansmith   *** Small Print and Disclaimer: Woodturning can be dangerous. The project in this video is a demonstration of a woodturning project and is not intended to replace a physical lesson from an experienced woodturner. At all times, you are responsible for your own safety, that of your workshop and other people in it. Ensure you wear suitable personal safety equipment at all times. This is my way of turning this project - Other turners may turn it differently and you may find your own way of reaching the same result. By copying these techniques, you do so at your own risk. Please note that I am not sponsored by any of the companies or products linked to in the 'Useful Links' section. Nor do I necessarily endorse them. Thank you for your understanding.