2005-2015 TACOMA VVDI WIRED UNIVERSAL FLIP KEY TOYOTA STYLE (MAX KEY TOOL) скачать в хорошем качестве

2005-2015 TACOMA VVDI WIRED UNIVERSAL FLIP KEY TOYOTA STYLE (MAX KEY TOOL)

I will show you how to clone and generate remote with vvdi max key tool!! 2010 is a split year for toyota tacoma .. either you will have a dot chip or "g" chip for year 2010 only!! If you have any other questions please email me at lilroxx001@yahoo.com please bare with me i get hundreds of emails!! Thank you please subscribe!! CASH APP: $PAYMEMONEYMIKE Paypal: https://paypal.me/mike90f?locale.x=en_US Step by Step How to Programming Instructions: 1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked. 2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out. 3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out. 4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition. 5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point. 6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote. 7. Open drivers door.