Скачать с ютуб etrailer | Let’s Check Out the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip в хорошем качестве

etrailer | Let’s Check Out the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip

Click for more info and reviews of this MAXXAIR RV Vents and Fans: https://www.etrailer.com/RV-Vents-and... Check out some similar RV Vents and Fans options: https://www.etrailer.com/dept-pg-RV_V... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-Demo-MAXX... Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at this MaxxAir II RV and trailer roof vent cover with EZClips, and this is in a smoke color. And this roof vent cover is designed for your RV or your camper, and it's gonna enable you to open the vent and operate your fan in any weather. It will also help keep the rainwater from entering or damaging your RV interior, and it's gonna help prevent any heat buildup. It features this sleek aerodynamic design as you can see here, so it's gonna reduce wind resistance. It is made in the USA of a durable, high-density polyethylene construction. Again, this is in a smoke color and is also UV resistant. The large vent area on the back of the cover is going to help maximize airflow, and the angled louvers allow smoke, odors, and stale air to escape while at the same time preventing rain and other debris from getting in. And on both sides, it has these vents here with the angled louvers to create cross ventilation, and this will give you twice the size of vent area compared to your standard covers. Now, along the sides here, there are two EZClips, and again, they are on each side, and they're gonna make it very simple to open or remove the cover for any roof maintenance, so no tools are needed. This is designed to fit the 2015 and newer MaxxFan and MaxxFan Plus roof vents that have the mounting tabs on them, and it's designed for those clips to attach to those mounting tabs, so there's no drilling required for the installation on the MaxxFan or the MaxxFan Plus roof vents. To open it up, all you have to do is pull these pins out of the cover, and it will allow you to raise it up, and then to close it, you would just push these pins back in and push them back and lock them into place. Now, this MaxxAir II cover is compatible with non-powered roof vents, low, meaning three to four speed, or high-powered ventilation fans, and that includes the MaxxFan vents and certain MaxxFan Plus vents. And this is again a very simple insulation over your roof vent, there's no need to drill into the roof of your RV or trailer. Now, this cover can be used on other brands of roof vents and fans, but it will require drilling into the vent or into the fan's frame. Now, these clips are designed to mount onto the frame of the roof vent or the fan using the included hardware that you see right here. And this is designed to fit most standard 14 inch by 14 inch roof vents. This does include a set of instructions as you see here to help you with the installation. And just some overall measurements, beginning with the height, we're gonna be measuring here at the highest point of this cover, and we're gonna be sitting right at 9 3/4 inches tall, and in regards to the length, we're gonna be sitting right at 22 inches long, and then in regards to the width, we're gonna be sitting right at 17 1/2 inches wide. And we also have this available in a solid black color as well, and you can find that on our website. But that's gonna conclude our look today at this smoke colored vent cover. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me..