[90%] YUZU - Just Dance 2020 + feed motion data скачать в хорошем качестве

[90%] YUZU - Just Dance 2020 + feed motion data

How to setup your input software to provide motion sensor data? -----------------------1----------------------------- DS4Windows (supports DS4 controllers ONLY, but uses the normal USB drivers and the Windows Bluetooth stack) Download the latest version of ryochan DS4Windows fork from their GitHub releases page (here https://github.com/Ryochan7/DS4Window... ) If you already have DS4Windows setup, it should be working fine when tested with XInputTest ( https://files.sshnuke.net/XInputTest.exe ) Close any running DS4Windows instances and extract the new version to where you have DS4Windows.exe, overwriting any files when prompted If you never had DS4Windows before, you can extract it anywhere you want (preferably out of program files for UAC reasons) Once you start my version up, the Log tab (and the status bar of the window) should say that the UDP server was started. If not, go to Settings and enable it. In case there is red error message about UDP server in Log tab, close any other instances/stop any services of DS4Windows or ScpToolkit You can verify that all the inputs/mappings are still correct by using XInputTest like before -----------------------2----------------------------- After you're done setting up your motion provider Download my PadTest program (latest version 1.0.1.1) from here: PadTest_1011.zip ( https://files.sshnuke.net/PadTest_101... ) Run PadTest.exe from that archive, once the window pops up, click start and then double click your controller's MAC address from the list (it should be added to the rightmost list) Verify that the 3d preview orientation of your controller matches it's real world orientation (it will be more imprecise for DS3 than DS4), which you can reset to neutral by hitting the CROSS button Over USB connections, the UPD rate should be pretty constant, and the Min/Max values next to it should be near identical to each other and the Avg value Bluetooth connections might need some tweaking, if your UPD rate is much lower than your selected BT polling rate (like getting 500-700 UPD for 1000hz), you should set it to a lower hz (available in the Profile settings inside DS4Windows, i find that 250hz works well) ----------------------3----------------------------- Yuzu Setup , look 0:30