How to access IP camera web interface settings and configuration? скачать в хорошем качестве

How to access IP camera web interface settings and configuration?

*How to Connect and Access an IP Camera* 1. *Connect the IP Camera:* Connect your IP camera to your laptop or network switch using an Ethernet cable. Power the IP camera using a **12V power adapter**. 2. *Find the Camera’s IP Address:* Open *Device Manager* on your PC (or use an IP scanner tool). Locate the camera’s IP address in the network devices list. 3. *Ensure Proper Network Configuration:* Your PC and the IP camera must be on the **same local network**. To configure your PC’s IP: Open *Command Prompt (CMD)* and type `ncpa.cpl` to open **Network Connections**. Right-click your Ethernet adapter → *Properties* → **IPv4 Settings**. Manually set your PC’s IP address to match the camera’s subnet (e.g., if the camera is `192.168.1.100`, set your PC to `192.168.1.101`). 4. *Access the Camera’s Webpage:* Open a web browser and enter the camera’s IP address (found in Device Manager or via scanning). Log in (default credentials may be required) to configure the camera. --- *Additional Notes:* If the camera’s IP is unknown, use *IP scanning tools* (like *Advanced IP Scanner* or **Angry IP Scanner**). Some cameras may require *PoE (Power over Ethernet)* instead of a separate power adapter.