1986-2007 Ford Taurus CV Axle Replacement скачать в хорошем качестве

1986-2007 Ford Taurus CV Axle Replacement

1986-2007 Ford Taurus CV Axle Replacement Tools you will need for repair: Jack stands or Jack CV Axle 30mm axle nut socket Lug wrench 19mm or 3/4" Brake cleaner 18mm socket for the tie rod or sway bar link Wire pliers for cotter pin 12mm socket for the brake caliper line Tie rod tool Piece of wire to hang caliper 21mm socket for strut bolt 10mm socket for brake line Torque wrench or impact driver Large pole to push down hub assembly Large screwdriver Large hammer Pry bar INSTRUCTIONS FOR CV AXLE REMOVAL: 1. Remove center cap 2. Loosen cv axle nut 3. Loosen lug nuts 4. Jack up car and place on jack stands 5. Remove wheel 6. Remove cotter pin from tie rod 7. Remove 18mm nut, place tie rod out of way 8. Remove 2 -12mm bolts holding brake caliper 9. Put caliper on a piece of wire and hang on the strut 10. Remove disc pads from caliper 11. Remove 10mm bolt from brake line 12. Remove 18mm nut from sway bar link, use a pry bar to loosen, push down 13. Remove 21mm nut from strut assembly 14. Remove 30mm axle nut 15. Push down on hub assembly, use a large bar if necessary, loosen from strut 16. Get a pry bar and pry cv axle from transmission 17. Remove cv axle from from assembly 18. Installation is the reverse