How to: Replace rear brake caliper (Ford Mondeo Mk3) скачать в хорошем качестве

How to: Replace rear brake caliper (Ford Mondeo Mk3)

Changing the rear brake caliper and working with the brake line, on a Ford Mondeo 2002... or, the basics of replacing a floating caliper with inbuilt parking brake, including aligning the piston correctly. See notes below. Related videos: Bleeding brakes:    • Simple how-to: Change brake fluid & bleed ...   Replacing & adjusting handbrake:    • How to: Replace and adjust handbrake, Ford...   Replacing handbrake cables:    • How to: Replace handbrake cables, Ford Mon...   You will need: Replacement caliper to suit Jack, axle stands, wheel nut socket & wrench Flare nut spanners: 14 mm (caliper brake line fitting), 11 (or possibly 10) mm (bleed valve & upper brake line fitting). Amazon US: http://amzn.to/2rkSzum | UK: http://amzn.to/2mNEKPo For upper brake line fitting (maybe): 17 mm open spanner For retaining bolts: 13 mm hex socket and breaker bar... ... and torque wrench (tighten to 30 NM), shown used is Tekton 24335 1/2". Amazon US: http://amzn.to/2g1zGoJ | UK: http://amzn.to/2gJ7sAg Medium strength threadlocker. Amazon US: http://amzn.to/2DN3Upv | UK: http://amzn.to/2mTuVAv Long nose pliers, or... ... 12 mm hex key or bit, or... ... Other winding adapter tool to suit. Amazon US: https://amzn.to/38FNNcc | UK: https://amzn.to/2PJULo3 Vice grips Brake fluid, Super Dot 4. Amazon US: http://amzn.to/2BbX6Pb | UK: http://amzn.to/2DRlatX Self-bleed kit (if no assistant). Amazon US: http://amzn.to/2rk35Sm | UK: http://amzn.to/2EUAULK Anti-seize copper or nickel based. Amazon US: http://amzn.to/2rlBU9Z | UK: http://amzn.to/2Beksni Brake clean. Amazon US: http://amzn.to/2DNbGj6 | UK: http://amzn.to/2Bfp4d4 Rags. == Tentative notes on retracting and aligning the piston for the Mondeo Mk3: == To 09-2004: Left side ~ Align circular cutout on piston with raised nib. (This is the one shown in the video). Right side ~ Align circular cutout on piston opposite raised nib. Retract the brake caliper piston using an Allen key and applying pressure. 4 & 5 door ~ Retract left side by rotating COUNTERCLOCKWISE. Retract right side by rotating CLOCKWISE. Estate/wagon ~ Retract left side by rotating CLOCKWISE. Retract right side by rotating COUNTERCLOCKWISE. From 09-2004: Align indents in the brake caliper pistons with the brake pad locating pins. Retract the brake caliper piston using winding tool. 4 & 5 door ~ Retract left side by rotating CLOCKWISE. Retract right side by rotating COUNTERCLOCKWISE. Estate/wagon ~ Retract left side by rotating COUNTERCLOCKWISE. Retract right side by rotating CLOCKWISE. CHECK that the piston is moving as expected as orientations have been known to vary. ===== Using the above Amazon links helps support my channel and is appreciated!