How to Install Outside Mount Panel Tracks скачать в хорошем качестве

How to Install Outside Mount Panel Tracks

Most people think installing their own blinds is hard. Following the simple, step-by-step instructions in this video though makes hanging your custom panel tracks easy to do yourself! Here’s how you do it: 1. Measure and place marks two to four inches from the sides of the window frame. This will be where your outside brackets will go. Any additional brackets should be spaced evenly between the two outside ones. 2. Determine the difference in height between the window and your shade. Measure and mark this distance above each of your previous marks. For example: Our shade is 80” tall, and our window is 78” tall. The difference in height is 2”, so I will measure and mark 2” above each of my marks from step 1. 3. Align the top of a bracket with each mark, and use the holes to mark where your screws will go. Pre-drill the holes with a 5/64" bit, and then screw the brackets into place using the provided screws. 4. Place a cornice bracket within 1" - 2" of each of your mounting brackets, making sure the bottom edges align. Use a pencil to mark the screw holes, and then use the screws provided to install each cornice bracket. Then, use a level to make sure all your brackets are even. 5. Place the cornice on top of the brackets you've just installed, and center it over your window. Insert 2 screws upward through each bracket to secure the cornice in place. 6. Once you have the cornice ready, clip the track into place. To do so, you’ll need to place the front of the track into the front groove of the brackets. Then, tilt the back up towards the ceiling until it clips into the back of the brackets. 7. Next, you’ll need to attach the panels. To do so, remove the paper bands holding the panels. 8. Unclip the back-most panel hanger from the track by lifting and pulling the top toward you. Once removed, attach a panel evenly to the velcro strip, then hang it back onto the track. Repeat this until you have attached all panels, moving from back to front. 9. That’s it! Now gently pull the panels side to side a few times to make sure everything looks and works right. If you need to remove your blinds, remove the panels from the track. Then, use a flat head screwdriver to gently pop the main track out of the brackets. Congratulations! You just installed your own panel tracks! Wasn’t that easy? If you have any questions or need any help with installing your panel tracks or any of our other shades or blinds, see your product’s installation guide on our website, https://www.selectblinds.com/ or give our Customer Care team a call at 888-257-1840. We’re here to help!