Drilling procedure for XGate Dental X11 and X3 Pure&Porous Implant 4.2 mm diameter soft bone type D4 скачать в хорошем качестве

Drilling procedure for XGate Dental X11 and X3 Pure&Porous Implant 4.2 mm diameter soft bone type D4

🦷 XGate Dental Drilling Protocol https://xgate.dental/wp-content/uploa... 🦷 IMPORTANT! Before installing X-Gate Dental implants, familiarize yourself with the protocol for preparing the implant site: https://bit.ly/3Mb1gyW. The installation implants is an important and responsible procedure that should only be carried out by a qualified dentist with experience in this field. In this process, a specific protocol for preparing the socket must be followed. 00:00 To install a 4.2 mm diameter implant in soft D4 bone, the socket must first be drilled into the hardest cortical layer of the bone using a special drill for cortical bone. Remember that the thickness of the cortical layer in this type of bone is small, usually between 1-1.6 mm. 00:30 Next, use a 2 mm pilot drill to penetrate the socket to full depth, applying moderate pressure and intense irrigation to cool the drill and bone. Then, use a sequence of drills with increasing diameter to expand the socket to the required depth. 00:34 First, drill 2/3 of the depth with a 2.5 mm diameter drill, then expand the socket to the same depth with a 2.8 mm diameter drill, 00:46 and finally use a 3.2 mm diameter drill to penetrate half the total depth. 00:50 Intense irrigation with water should be provided during drilling to avoid overheating the bone and causing thermal necrosis of the bone tissue after implant installation. After each drill pass, thoroughly rinse the socket with isotonic or physiological sodium solution to remove bone debris and reduce the temperature in the bone. 01:10 Next, install the implant in the socket. Use the aggressive thread profile of X-Gate Dental implants to screw it directly into the bone tissue and ensure good primary stability. The maximum allowable torque for implant installation is 50 N*cm. It is important to remember that improper implant installation can lead to various complications, including implant rejection, wound infection, and even damage to surrounding tissues. Visit the company website: https://bit.ly/3Mb1gyW. #implantdrillingprocedure #dentalimplants #dentalimplantsurgery #dentalprotocol . ‼️ Disclaimer: Any medical or scientific information provided in connection with the content presented here makes no claim to completeness and the topicality, accuracy and balance of such information provided is not guaranteed. The information provided by XGate Dental Ltd. does not constitute medical advice or recommendation and is in no way a substitute for professional advice from a physician, dentist or other healthcare professional and must not be used as a basis for diagnosis or for selecting, starting, changing or stopping medical treatment. Physicians, dentists and other healthcare professionals are solely responsible for the individual medical assessment of each case and for their medical decisions, selection and application of diagnostic methods, medical protocols, treatments and products. XGate Dental Ltd. does not accept any liability for any inconvenience or damage resulting from the use of the content and information presented here. Products or treatments shown may not be available in all countries and different information may apply in different countries. For country-specific information please refer to our customer service or a distributor or partner of XGate Dental Ltd. in your region.