LAP-C: How to measure CAN bus скачать в хорошем качестве

LAP-C: How to measure CAN bus

Video Introduction: How to measure CAN bus In order to measure the CAN bus, the user needs to set the trigger level to 3V. and choose the appropriate baud rate. For CAN_Hi signal, the user needs to enable reverse decoding. For extended mode, users can combine basic ID and extended ID. Brand name: Zeroplus Product Category: Logic Analyzer Analyzer Product name:LAP-C (http://www.zeroplus.com.tw/logic-anal...) Software name: LAP-C_Standard (http://www.zeroplus.com.tw/logic-anal...) Video description: 1. Click on the top of the toolbar "Acquisition" , From the drop down menu click on the "Trigger Properties". Set the trigger voltage Port A to 3V 2. Set sample depth, frequency and trigger position. Set the trigger condition 3. Group A0 channel into a bus. Set protocol decoders. Choose the appropriate baud rate. For CAN_Hi signal, the user needs to enable reverse decoding 4. Enable compression function. Click the "Single Capture" icon 5. Start the device under test 6. Click the "Packet List" icon For extended mode, users can combine basic ID and extended ID Related references (http://www.zeroplus.com.tw/logic-anal...) If you need any technical support, please contact us : [email protected]