Industry Slim LED industrial lighting IP66, Polish luminaire with silicone gasket скачать в хорошем качестве

Industry Slim LED industrial lighting IP66, Polish luminaire with silicone gasket

https://lenalighting.com/products/256... A completely new industrial luminaire, has a high luminous flux and a very high luminous efficiency of 160 lm / W, which makes this luminaire highly energy-saving and ecological. It is distinguished by a very high IP66 tightness. It owes this tightness to its well-thought-out design. The polycarbonate diffuser is permanently attached to the housing with a durable silicone gasket. This means that in addition to the tightness obtained in this way, the light module is protected against uncontrolled interference and access to the LEDs. The tightness of the lamp is ensured by a gland, which tightens the gasket and prevents the ingress of dust, moisture, and water. Industry Slim Led allows for suspended or surface mounting. The luminaire has been fitted with new luminous distributions: SW - a standard wide lens (80D conventional angle) with a wide range of applications in commercial buildings, industrial halls and even - due to its low glare index UGR19 - in office areas of the building. It provides high luminous efficacy and helps meet the stringent requirements of EN 12464-1 for glare index, illuminance and high uniformity on aisle and shelf surfaces. Particularly recommended for rooms where luminaires are mounted at heights of 3-8m. MW - medium wide lens (90D conventional angle) with a wide range of applications in commercial buildings, industrial halls and even - due to the low glare UGR19 - in office areas of the building. It provides high luminous efficacy and helps to meet the stringent requirements of EN 12464-1 for glare index, illuminance and high uniformity on aisle and shelf surfaces. Particularly recommended for rooms where luminaires are mounted at heights of 3-6m. VW - very wide lens (105D conventional angle) with wide application in open spaces and low warehouses. It provides high luminous efficacy and helps meet the most stringent requirements of EN 12464-1 in terms of glare index (UGR22, UGR25), illuminance and high uniformity when the system is installed in low spaces. Particularly recommended for rooms where luminaires are mounted at a height of 2.5-5m. Unified Glare Rating is an indicator characterizing glare. The lower the Unified Lighting Rating Index (UGR), the lower the glare. Application The luminaire is designed to illuminate industrial and warehouse facilities, due to its minimal dimensions, also in hard-to-reach places. The Industry Slim Led luminaire is available in various versions: with different optics, wide, narrow, and dedicated to high-bay light distribution, and five types of diffuser, including an anti-glare diffuser.