XG Screem Printing Silicone for Shoe Upper Vamp printing ink,insep printing ink скачать в хорошем качестве

XG Screem Printing Silicone for Shoe Upper Vamp printing ink,insep printing ink

TDS of XG Screen Printing Silicone Ink for Shoe Upper Vamp Printing Process Preparation 1.Mesh&Squeegee: 120(48T) Mesh number ;65-75 degree Squeegee. 2.Pigments added ratio:For white and fluorescent color 20%,other color 10% 3.Catalyst mixing ratio:10% slow dry XG-MB-1 Mid dry XG-ZB-1 3.Silicone thinner XG-128A adding ratio:0-20% 4..Heating Temp and time: cure temp :60℃~100℃,dry by room temp. Printing process 1.Crossing linker for under coating printing for 1 time Crossing linker XG-360Z-3 50G Crossing linker agent XG-360Z-3B 2.5G 5% Heat by 100℃ 2.Screen Printing Silicone print 4-8 times : Screen Printing Silicone XG-20S-2 50G Silicone slow catalyst XG-MB-1 5G 10% Silicone thinner XG-128AH 10G 10% Cure by 60℃~100℃ 3.Color effect silicone printing for 3-8 times Screen Printing Silicone XG-20S-2 50G Silicone pigments XG-302 5G 10% Silicone slow catalyst XG-MB-1 5G 10% Silicone thinner XG-128AH 10G 10% Cure by 60℃~100℃ 4A.Glossy silicone ink for top coating printing 2 times Glossy silicone ink XG-399-2 50G Slow dry catalyst XG-MB-1 5G 10% Silicone thinner XG-128AH 0-5G 0-10% Glossy top coating for 2 times wet on wet printing,to get silicone bubbles out first ,try to use cold wind to support and it will be better to use low temp by longer heating time to avoid bubbles problem. Cure by 60℃~100℃ 4B.Matte silicone ink for top coating printing 1-2 times Matte silicone top coating for 2 times wet on wet printing Matte silicone ink XG-136M-1 50G Slow dry catalyst XG-MB-1 5G 10% Silicone thinner XG-128AH 0-5G 0-10% Cure by 60℃~100℃ After printing , to heat by 80℃ for about 8 minutes ,for crossing linker have to heat at least 8 minutes to get supper fastness . For more silicone paste information contact with: E-mail:[email protected] ; Cell/whatsapp/wechat:+86-13825409489; Web: www.xgsillicone.com; Mr Kingjoe Liu