242T Programmable Pulser | Buchla 200 Series EP.12 | By Tiptop Audio скачать в хорошем качестве

242T Programmable Pulser | Buchla 200 Series EP.12 | By Tiptop Audio

I've been wondering how to approach this episode. If this were a module review, the 242 would not be able to stand up against modern 21st century sequencers. It's basically a 12 step sequencer with three rows of pulses so you can't even do a four on the floor. We need to remember we didn't have those in the late 60's, so let's not worry about that too much. The classic pin-controlled 242 was custom made for CBS and it didn't carry the Buchla name. CBS (Columbia Broadcast Systems, sorry about the typo in the video) was licensed to build and distribute the 100 series and it eventually stopped because CBS didn't see a future for electronic instruments. I guess you need to have a long term vision, and CBS clearly had a different one. Regardless, the 242 is extremely rare. Fortunately, the 242T is not. Tiptop abandoned the pins and fancy illuminated buttons in favour of small buttons and a LED matrix. The 242t is a Tiptop first, and a CBS/Buchla later. The 242 is a retro-futuristic trigger sequencer with some weird outputs. The ABC pulses are extremely short, but the alternating outputs are longer. Then, there's this SAW CV output which is tied to the master clock. There are start/stop and reset inputs and a CV controlled Period which is not unlike a frequency when pushed to audio rate. I tried to ping the 296 Spectral Processor with the ABC outputs, but these are barely audible. If you want to ping a rhythm on the 296, you'll need to use 281 envelopes and patch from there. Using them to ping a 292 vactrol is just wonderful. Stazma and Todd Barton made excellent video manuals, so I am not going to explain the module in this video. Since nearly every Buchla module is either quad or dual, I used two 242 modules. I had to. Imagine it's the early 70's and it's the Dawn of Synthesis. We have no idea what the future will bring.