Taranis Q X7 USB Battery Mod скачать в хорошем качестве

Taranis Q X7 USB Battery Mod

WARNING: Do not try this if you do not know what you are doing. Any damage to your stuff is not my fault. Any injuries you may sustain are also not my fault. Before putting everything together, connect the USB to the power supply board and adjust the POT so the output is 9v. The POT on the power supply board might need to be turned counter clockwise several times before the voltage will increase. I thought mine were broken at first, just keep turning it. It is a 24 revolution POT. Then connect it to the battery charging board. Please keep things safe and cover the exposed wiring and solder joints with tape or shrink wrap if you have a tube big enough. I believe full charging time is a few hours. Parts: Charge Board https://www.banggood.com/2S-7_4V-4A-1... Step Up Power Supply (I'm sure they sell individually) INFORMATION: you may need to turn the POT counter clockwise many times until the voltage goes up. https://www.banggood.com/10-Pcs-Step-... Micro USB Header https://www.banggood.com/Micro-USB-To... Balance Plug Set (or you can cut the one off the AA battery tray) https://www.banggood.com/10pcs-JST-XH... 2x 18650 Li-ion batteries. Easily sourced from thick old laptop batteries. Please test them before using as bad laptop batteries usually have 1 or 2 good cells out of 3. You don't want to use the bad ones that are 0v as they may overheat while charging.