Yolin YWS-20 display options & advanced settings - eBike or Scooter скачать в хорошем качестве

Yolin YWS-20 display options & advanced settings - eBike or Scooter

In this video, I walk through the display options and advanced settings menu of the Yolin YWS-20 display, which is featured on a variety of e-bikes including, but not limited to, the Euy 20, Vfreedom Cityrang 4.0, and Philiam FX1 Advanced Settings Menu: P01 = 00 for km/h and 01 is for mph P02 = Voltage (48V) P03 = PAS modes = number of Pedal Assist modes 1-3 or 1-5 P04 = Tire Side (outside diameterin inches = 22) P05 = Speed Ratio (01 is 100%) 02-09 not sure? P06 = Speed Limit in mph (default = 32) P07 = Amps (higher the amps the more torque, but less range) P08 = run-F setting for motor to run forward, run-b is for backwards P09 = Pedal Assist sensitivity. The lower the number, the faster pedal assist will kick in while you start pedaling P10 = PAS 12 - Number of Magnets in the motor P11 = 00 is zero start - throttle work from 0 mph. 01 is non-zero start and bike requires pedaling up to 6 km/h or 4 mph before motor turns on to aid with pedal assit. P12 = Throttle level setting: 00 the throttle speed will not be limited by the current pas speed limit. Set it to 01 and the speed will be limited to the current pas speed limit. Unfortunately, that did not work on my bike P13 = Restore to Factory Default with psd-Y resets passcode: 1212 P14 = SL 10 = Screen Dormance - how long the screen will remain on without using before it turns off To reset the trip meter. Press and hold the power and minus button at the same time for 2 seconds while the display is turned on Chapters: 0:01 - Intro 0:24 - Display options 1:34 - Advanced Settings Menu Please Like and Subscribe    / brichsolution     / b_rich_solution     / brich2021   https://brichsolution.com/ FTC: Some of the products linked above use income earning auto affiliate links, which means that if you click one of the links and purchase a products, I could receive a very small commission (at no additional cost to you). Dans cette vidéo, je présente l'écran YOLAN YWS20 et sa télécommande, que l'on retrouve sur un velo electrique V Freedom City RAN 4.0. J'explique comment allumer l'écran, modifier le mode d'assistance et accéder aux paramètres avancés, tout en utilisant les panneaux led. Découvrez les différentes fonctionnalités de cet affichage dynamique.