У нас вы можете посмотреть бесплатно Removing Water Spots from Refractor Telescope and Cinematography Objectives или скачать в максимальном доступном качестве, видео которое было загружено на ютуб. Для загрузки выберите вариант из формы ниже:
Если кнопки скачивания не
загрузились
НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если возникают проблемы со скачиванием видео, пожалуйста напишите в поддержку по адресу внизу
страницы.
Спасибо за использование сервиса ClipSaver.ru
This video describes the process of removing water spots from refractor lenses. Water spots are very difficult to remove and our polymer does not always remove all of the contaminates, so this two-step process is often necessary. Updated note: When coating orings with the polymer it is best to apply two coats. Two coats will make the dry flim thicker and be more resistant to the polymer "eating through" should one apply a bit too much polymer that pools near the oring, or can help "stick" the oring to the optic surface should the oring not lay perfectly flat. It is very important for the oring to lay flat to avoid the polymer running underneath; follow instructions on our oring use document to gently heat the oring and allow it to "relax" and lay flat: http://www.photoniccleaning.com/v/vsp... Our store page: https://www.photoniccleaning.com/